BOT 31W

0º

Cod: R13.2000

22º

Cod: R13.2220

36º

Cod: R13.2360

45º

Cod: R13.2450

45º L

Cod: R13.2451

BOT-32W

Welding process:
MIG/MAG, GMAW, 131, 135.

Liquid cooling.

350 A with CO2 – cycle 100%.

300 A Mix M21 (ISO 14175) – cycle 100%

Wire 0.8-1.2 mm

Gas flow 10-16 l/min.

Technical data according to IEC 60974-7

MIG / MAG neck model for places of difficult access, medium work intensity and adaptable to many robotic applications, short spare model to facilitate welding in narrow places.

The welding systems for industrial robots BOTseries are designed for work cycles of 24 hours, developed for an intensive use, precise and specifically adapted to long work cycles.

Advantage of BOTseries collars.

  • Compatible with all robot systems iBOT *, eBOT *, cBOT *. This allows you to exchange necks bet ween different systems.
  • Replacement with Easyclean cleaning system, completely eliminates the projection inside.
  • Double cooling system with two independent circuits, doubling its cooling capacity.
  • Fully independent gas protection system, greater flow in the gas outlet and less porosi ty.
  • Extra cooling at the contact point with the COOLTIP system.
  • Possibility of multiple neck geometries for all types of applications.

* iBOT system for robots with hollow wrist shaft and internal wiring to axis 6.

* eBOT system for standard robots with closed wrist and external wiring to axis 6.

* cBOT system for robots that can be used in both standard robots and hollow shaft robots (with the replacement of the adaptation plate).