Monthly Archives: May 2019

Welding spatter

2019-10-22T14:36:27+00:00

Welding spatter When we MIG weld, spatter will most likely appear. Spatter are leftovers of welding wire that have not melted with the weld puddle. We will see in this post, what are the main causes, the consequences and how to eliminate it. Causes Spatter are caused by different reasons. The main ones are the following: Mostly, it is caused by the relationship between current and voltage of our welding machine. Normally this occurs when the welding voltage is too low or the current too high for a certain combination of wire and gas. In this situation the arc is too [...]

Welding spatter2019-10-22T14:36:27+00:00

Keys to choosing robotic welding torches

2019-10-22T14:41:19+00:00

Keys to choosing the right robotic welding torch Choosing between an optimal or inadequate robotic torch, could mean the difference between reaching your weekly quality and productivity targets, and struggle to meet promised lead time. To help you select the most convenient torch for your welding application and maximize the efficiency of the operating team, quality and profitability, you should consider these 8 key points: 1.Understanding the Tool Center Point (TCP) Tool Center Point, or TCP, is a point in space with a mathematical reference to the flange of a robot. For robotic welding GMAW, this is mainly how the [...]

Keys to choosing robotic welding torches2019-10-22T14:41:19+00:00
Go to Top